| Printing system |
Piezo ceramics drive on demand. |
| Maximum supported line speed |
200m / min (concentration 1) ～ 31m / min (concentration of 9) |
| Nozzle arrangement |
32 nozzles, 2 holes / nozzle |
| Ink ejection direction |
Horizontal |
| Character height |
2～20mm, 25.4mm（when vertical） |
| Number of heads |
1 |
| Ink type |
Black: CK RED: CK |
| Work detection |
Phototube (head fixing type external type) |
| Number of printintable stages |
1 stages (32×32dot), 2 steges (16×16dot) |
| Number of recorded messages |
30messages |
| Number of recorded characters per message. |
48characters |
| Character type |
Alphabet (upper case / lower case), numbers, symbols, Japanese hiragana, katakana, |
| kanji(48characters), User recorded characters (customer recorded 180 characters |
| selected arbitrarily, before shipment). |
| Character font |
Gothic font (16 dot font bold, fine print selectable). |
| Date Time (expiry date) Printing function |
Year (Western / Japanese calendar), month, day, hour (12/24, minute), |
| free format, offset value can be set, calendar character allocation function. |
| Numbering function |
Max.of 8 digits, (up/down), repeat, increment value setting, zero suppression |
| Bar code printing function |
Improper |
| Figure |
Improper |
| External interface |
I / O: 3 points (preparation ready / low ink / alarming) |
| RS-232C: data backup and restoration, only usable for software version up |
| Use environment (temperature, humidity) |
5-35°C, 10-80% (however, non-condensing) |
| Power supply |
Less than AC100V |
| Ground |
D type grounding |
